| Willys Jeep CJ3B |
| Body | Brake | Chassis | Clutch | Cooling | Electrical | Engine | Exhaust Front Axle | Fuel | Propeller | Rear Axle | Rebuild Kits | Steering | Suspension Transfer Case | Transmission | Weatherstrip | Wheel |
 | |  | |  | |  | |  | |  |
| Midwest Jeep Willys Copyright © 2005 - 2008 Terms & Conditions Midwest Jeep Willys distributes replacement parts for Jeep® vehicles. Midwest Jeep Willys is not affiliated with DaimlerChrysler Corp. Jeep®, the Jeep® grille, CJ, Wrangler, Cherokee, Grand Cherokee, Grand Wagoneer, and Willy's are registered trademarks of DaimlerChrysler Corp. |
| Call 630-529-2116 Fax 630-351-3008 |
| ______________________________ |
| ______________________________ |
| ______________________________ |
| ______________________________ |
| ______________________________ |
| ______________________________ |
| ______________________________ |
| ______________________________ |
| ______________________________ |
| ______________________________ |
| ______________________________ |
| ______________________________ |
| ______________________________ |
| ______________________________ |
| ______________________________ |
| ______________________________ |
| ______________________________ |
| ______________________________ |
| ______________________________ |
| ______________________________ |
| ______________________________ |
| ______________________________ |
The CJ-3B replaced the CJ-3A in 1953, the same year Willys was
sold to Kaiser. It introduced a higher grille and hood to clear the
new Willys Hurricane engine. The CJ-3B was produced until 1968
with a total of 155,494 produced, although the design was licensed
to a number of international manufacturers, including Mitsubishi of
Japan and Mahindra of India. Mitsubishi ceased production of
vehicles derived from the CJ-3B design in 1998, but Mahindra
continues to produce Jeeps today.
sold to Kaiser. It introduced a higher grille and hood to clear the
new Willys Hurricane engine. The CJ-3B was produced until 1968
with a total of 155,494 produced, although the design was licensed
to a number of international manufacturers, including Mitsubishi of
Japan and Mahindra of India. Mitsubishi ceased production of
vehicles derived from the CJ-3B design in 1998, but Mahindra
continues to produce Jeeps today.
F-134 "Hurricane" 4 Cylinder Engine
Specifications:
Spark plug gap: 0.030 in. (0.762 mm)
Spark plug torque: 25-33 lbs. ft. (34-44 Nm)
Firing order: 1-3-4-2
Distributor rotation: Counterclockwise
Point gap: 0.020 in.
Dwell angle: 42 degrees
Ignition timing: 5 degrees BTDC
Bore and stroke :3 1/8 in. x 4 3/8 in. (79.37 mm x 111.12 mm)
SAE Horsepower: 15.63
Weight: 470 lbs. with fluids
Max. Horsepower: 72 @ 4000 R.P.M.
Torque: 114 lbs. ft. (15.7 kg-m) @ 2000 R.P.M.
Compression pressure: 120-130 psi (8.4-9.2 kg-cm2)
Compression ratio: 6.9:1 (7.4:1 high altitude option).
Specifications:
Spark plug gap: 0.030 in. (0.762 mm)
Spark plug torque: 25-33 lbs. ft. (34-44 Nm)
Firing order: 1-3-4-2
Distributor rotation: Counterclockwise
Point gap: 0.020 in.
Dwell angle: 42 degrees
Ignition timing: 5 degrees BTDC
Bore and stroke :3 1/8 in. x 4 3/8 in. (79.37 mm x 111.12 mm)
SAE Horsepower: 15.63
Weight: 470 lbs. with fluids
Max. Horsepower: 72 @ 4000 R.P.M.
Torque: 114 lbs. ft. (15.7 kg-m) @ 2000 R.P.M.
Compression pressure: 120-130 psi (8.4-9.2 kg-cm2)
Compression ratio: 6.9:1 (7.4:1 high altitude option).
| CJ3B - 1953 - 68 F HEAD ENGINE, 1 PC. WINDSHIELD, WITH TAILGATE, POINTED FENDERS, SERIAL NO. LOCATED ON DASHBOARD & RIGHT SIDE UNDER HOOD. |